|
SCAM ALERT!!
Once again another fellow ad poster has gotten an email from an Internet Scam "Artist". The m.o. is the usual deal where they want to send you hundreds or even thousands of dollars more than what your asking. And then you are suppose to in turn send them the item and the "extra" back. It's only later that you find out that the check or money order is fake.... Clearly, if this were a real deal then the buyer would only pay for the item plus shipping. If they offer to pay more or "need to" overpay, then that is a sign that you are being scammed. |
|
Jul 2, 09 ~ WANTED
KICKER ASSEMBLY FOR A 1987 CAN AM TRIAL 300. ALSO WOULD LIKE FRONT AND REAR OEM FENDERS FOR THE BIKE, GOOD USED IS OK AS WELL. IF YOU HAVE THESE PARTS OR KNOW WHO CAN HELP ME THAT WOULD BE GREAT. THANKS, PHIL MARCH 585-298-1959 - OR- JMARCH76@YAHOO.COM |
|
Jul 2, 09 ~ Wanted
Hi All. I am looking for a TNT taillight assembly and the reflectors that go on by the headlight. The taillight part I really need is the black panel the lens fastens to. I would be interested in front turn signal hardware & some OEM rear shocks to. Thanks! tylerp@roadrunner.com |
|
Jul 2, 09 ~ For Sale
1975 Can-Am TNT 250 in need of TLC. Oil injector failed, transmission locked up(probably a bearing I'd guess). Piston rings and jug are fine as I have removed the jug to check. I did not dismantel any further. I would like to sell the bike as is. It has been stored inside but has crome peeling on the rims and needs some cleaning up. Also the front fender is broke. I was told this is a collector's item but I am open to reasonable offers. I am asking $1100 or best. Call 231-3571518 I and the bike are in Northern Michigan, Traverse City area |
|
Jun 23, 09 ~ For Sale
175 Qualifier engine and pipe. From basket case project being robbed of suspension and swingarm. Or trade Bultaco stuff? Scott 585-507-7974 scott@usadualsport.com |
|
Jun 23, 09 ~ Wanted
HELP!! on my 86 ASE 250 I finally have almost all the parts I need. I have an 80/81 350 ( 280? cc) RV engine in place but the carb angle is wrong to line up with the airbox boot. ANY sugestions? I ordered an inlet tube from an ASE on EBay but it has not arrived yet. Are there different airbox boots? I also have 2 80/81 250 qualifiers for parts, what do you need? Jon 802 933-2322 theschurgers@wildblue.net |
|
Jun 18, 09 ~ For Sale
I'm selling off a collection of 40+ Can Am's. From race ready to basket case's, Mx's(couple liquid cooled), ASE's, qualifier's, TnT's, Mx3's, etc. haven't raced in awhile, and i haven't had time to maintain all of them as I should, and I hate to see them sit! I'd like to see someone else have as much fun w/them as I have. Bikes are located in Port Matilda,Pa. I can be reached at no1canamfan@yahoo.com please only serious cash buyers! If your interested in a basket case, and would like me to restore it for you, that can be arranged. From race ready to full restoration. Thanks! |
|
Jun 18, 09 ~ For sale
2000 ATK 260 liquid cooled rotax 2 stroke.
1st year for rear ohlins pds. bike has new topend, (and this is first time since new) new sprockets,chain,air filter,and tires. has about 4 hours since this stuff was replaced. runs great,could use a seat cover,stickers are missing,but good cond. overall. Price is $1500.00, I also have a street legal 1997 ATK 605, available for $2800.00 (pic is of 260lc) I can be reached at no1canamfan@yahoo.com Bike is located in Port Matilda,Pa. Thanks! |
|
Jun 18, 09 ~ For Sale
I have a 1996 Mz Saxton Tour 500cc for sale.
This a has the rotax engine. bike is in very good cond. runs 100% i have new tires, front and back that will need installed. has removeable hard case bags. only has 9000 miles. reminds you of a bmw(kinda). Bike is located in Port Matilda,Pa. price is $1800.00 and i can be reached at no1canamfan@yahoo.com thanks! (It's Rotax powered from the factory, so it counts! ~Rich) |
|
Jun 9, 09 ~ Wanted
Can Am 1977 mx3 250 exhaust pipe Eric Eibell 727-458-4721 |
|
Jun 9, 09 ~ For Sale
1982 175 Qualifier IV
The bike runs I would like to get $800 out of it. Frame number: 8509, and the bike is located in Corning, NY. Thanks, Dave stuffdave@yahoo.com |
|
Jun 6, 09 ~ Wanted
1979 CanAm 250 flywheel puller I am looking for a flywheel puller for my 1979 CanAm Qualifier. If you have one or know were I can get one please let me know. Thank you. Brent (909) 731-3188 canambrent27@yahoo.com |
|
May 21, 09 ~ For Sale
1999 ATK 490 DUALSPORT
3034 MILES ON BIKE AND BIKE IS READY TO RIDE. FULLY STREET LEGAL WITH CLEAR TITLE. BIKE HAS KICK AND ELECTRIC START (NEW BATTERY) PROVEN ROTAX 4-STROKE ENGINE, NEW PRO TAPER HANDLE BARS, NEW STREET LEAGAL DUAL SPORT KNOBBIES, SUPER TRAPP EX, NEW TIMING BELT, NEW CLUTCH CABLE,NEW BRAKES,OHLINS REAR SHOCK,GOLD TALON HUBS, RUNS AND DRIVE LIKE NEW,FULL SERVICE LAST WEEKEND. MANY X-TRAS COME WITH BIKE. LOCATED IN DULUTH MN CALL MIKE 218-348-8885 SERIOUS ONLY PLEASE $2500.00 BEST OFFER |
|
May 18, 09 ~ Wanted
Looking for a 1977-1979 Qualifier with street title with working oil injection. mark1976@stny.rr.com |
|
May 12, 09 ~ Wanted
I am looking for a coil for a 1971 canam 250 part number is Bosch #1217 280 022 rtotten@cogeco.ca 905 734-8384 Ron |
|
May 12, 09 ~ Wanted
I am looking for a 175 tnt, would prefer a running one, but I might also take a look at one that isn't running. Let me know if anyone has one out there? tiny1377@gmail.com |
|
May 3, 09 ~ Wanted
Desperately looking for air scoops / rad shrouds for a 1986 Can-Am ASE 250. Also cover plastic over air box to match. Will consider anything. Contact Chris at: plancost@hotmail.com |
|
May 3, 09 ~ Wanted
WANTED WANTED WANTED!!!!!!!!!!! I just picked up a 1976 MX250 and am looking for some stuff! Probably more once I get into it. I need a right side cover! Also an MX3 style up pipe or information on who is currently making this type of pipe. I think I remember seeing a company making them a number of years ago, but can't find any info on it now. I also have a 1975 TnT 250 that I would be willing to sell. It is really nice with only 660 original miles. I got it about 10 years ago when it had about 440 miles on it. I put those miles on back then on farm land in Massachusetts. It is almost all original, missing the blinkers and I replaced the rusty chrome wheels with 77 qualifier alloy wheels. It had been stored since and only recently restarted. I changed the fluids, cleaned the carb and filter, bought a new Yuasa battery OEM and it started on the first kick. It also has new zero miles Dunlop MX tires. Also Repro fenders, stickers and painted tank, but I have the solid, faded originals. Thanks for the ad Contact blakeaddison68@gmail.com I am in the Los Angeles area |
|
Apr 18, 09 ~ Wanted
Looking for a Can-Am Sonic 500 Call 518-570-9140 Kyle Roberts |
|
Apr 10, 09 ~ For Sale
Fresh 250 liquid engine.
Has a shift shaft installed on right side. Has a Bosch flywheel & stator, but no coil. No carb or kicker. 712-330-2295 or email rvsjr@mchsi.com $1000.00 shipped anywhere in US. Thanks. |
|
Apr 10, 09 ~ For Sale
1985 CAN AM ASE 200
$1,000.00 · Very Strong 200CC Air Cooled Rotax 2 Stroke · New Rear Tire, and Good Front Tire · Good Working Rear Mono Shock and Front Forks · Starts Very Easily, and Runs Extremely Strong · Missing Rear Tail Light, Front Headlight Bulb Burns Out, and Clutch Needs Minor Adjustment · Contact Scott At (317) 441-3751 - or - tscottdick@gmail.com , Call or Email If You Have Any Questions Or Need Additional Info. Bike is located in Indianapolis |